Cap Pipe Fitting
November 20th, 2008
Cape pipe fitting is a fitting with a female (inside) thread. They are used like a plug, except in the pipe cap. For providing connection point, these must be fitted several inches behind the pipe.
Cap pipe fittings are manufactured from aluminum, delrin, ethyl vinyl acetate, monel, nylon, polyetheretherketon (PEEK), polyethylene (PE), polypropylene (PP), silicrub styrene butadiene and steel stainless steel. Moreover, as per the requirements of clients, we manufacture cape pipe fittings of difernt sizes and shapes like round, square, rectangular, “U” shape, “I” shaped with round hand grip or flat hand grip.
See also:
- Aligning Flange and Fixed Pipe (January 6th, 2009)
- Aligning Elbows by Steel Squares (January 2nd, 2009)
- Aligning Elbow and Tee using Steel Squares (December 29th, 2008)
- Alignment of a 45 degree elbow and pipe in oblique position (December 26th, 2008)
- Alignment of Tee and Pipe with Steel Squares (December 23rd, 2008)
Leave a Reply
You must be logged in to post a comment.